Homebrew CNC | Raynerd.co.uk

CNC Router MDF Build with Ball Bearing Draw Slides

by Christopher Raynerd | Mar 29, 2016 | Homebrew CNC | 0

I am writing this post 6 years on just due to the shear amount of views this video has on youtube....

Isel CNC CPM 3020 / CPM3020 router – Mach3 and new drivers

by Christopher Raynerd | Mar 29, 2016 | Homebrew CNC | 0

I recently made an ebay buy and got myself an old CPM 3020 by ISEL. I didn`t know much about it...

Building a CNC router dust boot / skirt / shoe

by Christopher Raynerd | Mar 25, 2016 | Homebrew CNC | 0

So I decided to build a CNC dust boot for my router. Turned out well, just wish I had used thinner...

A Parquet Floor & Inlay

by Christopher Raynerd | Oct 7, 2012 | Homebrew CNC, Other Projects | 3

I`ve recently been trying to sort out the house and have had very little time to do any projects...

3D Printer – calibrated and printing

by Christopher Raynerd | Jun 7, 2012 | 3D Printer RepRap | 0

I did my usual and rushed in places. I just can`t help it as I was dying to see some plastic being extruded. Now I have a running machine, I spent time calibrating all the axis properly. Now it is calibrated, the bed is level...

3D Printer – Extruding Plastic!

by Christopher Raynerd | Jun 1, 2012 | 3D Printer RepRap | 0

I am now at a stage where I can extrude plastic!! Here is the extruder built up: the extruder has some gearing which ultimately turns a hobbed bolt which grips the filament and forces it down through the nozzle: All the...

3D Printer RepRap Prusa 2 – 3 axis built

by Christopher Raynerd | May 14, 2012 | 3D Printer RepRap | 0

Well in the little bits of time I pinch in the workshop, I`ve made more progress. I`ve put the 6mm ply table on 225x225mm with the belt and motor in place for the Y motion: I`ve gone for a double bearing rather than using the...

RepRap Mendel Prusa 2 – Build log – getting started

by Christopher Raynerd | May 12, 2012 | 3D Printer RepRap | 2

After finishing my CNC machine, I`d quite like to have a go at a 3D printer as the concept amazes me. The guys on the IRC channel are really helpful but I am pestering quite a bit as there seems to be quite a few differences...